- Home >> Solution >> Electronics >> cleaning beauty
Curling Iron Solution
A curling iron (curling iron) is a hand-held electronic product used to curl hair. Its main components are a handle and a heating roller. The design of the curling iron uses a circuit panel to control the temperature. The material of the heating roller is a tourmaline ceramic panel, which can evenly disperse the heat, circulate heating, improve the protein structure of the hair to create bending, and protect the hair quality during the curling process.
1. Types of curling iron solutions
1. Hair curlers can be divided into three types according to different heating elements, namely ceramic heating elements, PTC heating elements and heating wire heating elements. The advantage of the ceramic heating element is that it is environmentally friendly, and the heating speed is fast, and it can reach 200 degrees in one and a half minutes, but the disadvantage is that the overall cost of the hair curler using the ceramic heating element is about 30% higher than that of PTC or heating wire.
2. According to the different styles of curling, there are two types: straight sticks and vertebral sticks. Straight stick, that is, the curling iron has the same diameter from top to bottom, and the up and down patterns of the curled hair are consistent with the curls of the curly hair. The curling iron with a tapered barrel can curl the hair into wavy curls with different upper and lower sizes. Curls can vary from small to large, or from large to small, and there are many hairstyles.
3. According to the way of use, it can be divided into three categories: manual curlers, semi-automatic curlers, and automatic curlers. Traditional hair curlers are not easy to design, but automatic hair curlers have three classic hairstyles: natural wave, soft curl, fashionable and charming, and a variety of DIY combination changes. In addition, the automatic hair curler sets the temperature, time, and direction through the system, so that the curly hair design can be controlled throughout the whole process, and has a balanced heating design with natural and perfect curls, which does not damage the hair quality. Design, fully automatic system design, tangle-free, no-tangle, no-clip sensor design and more than 10 years of life design and many other innovations, absolutely put an end to traditional curling tools.
The multifunctional curling iron is a set of multiple functions. It not only has the functions of straightening and curling hair, but also protects and nourishes hair while perming. It not only has the function of straightening and curling hair, but also has the function of negative ions and steam, which can better protect the hair and make it no longer rough.
2. Curler scheme design algorithm
With the improvement of living standards, hair curlers have not only appeared in the professional market as personal care products, but also entered thousands of households. At present, most hair curlers on the market use PTC as the heating material. The temperature control mainly depends on the characteristics of PTC. There is only a single point temperature control, and the temperature dispersion point is large, and the actual use effect of the user is not very ideal. The temperature-controllable curling iron with higher precision control can meet the needs of high-end users. Users can set the required temperature according to the actual situation, so as to achieve better curling effect. The PID algorithm is used as the basic theory of temperature control to ensure its control accuracy. At the same time, the circuit principle design is strictly implemented and complies with the CEFCC demonstration standard, so that the product can be widely sold at home and abroad.
The hair curler circuit of the PID algorithm is mainly composed of four parts: the power input part, the main components are safety capacitors, varistors and fuses, which are designed to meet the national compulsory certification; the thyristor control part, relying on MCU According to the output control signal of the MCU, the generated double voltage is controlled by the transistor (X0405); the single chip microcomputer (MCU) part uses the PID algorithm to calculate the control signal according to the temperature detection value of the PTC and the AC zero crossing point, so as to realize Control the temperature; the human-machine interface adopts LED display, and the temperature display range is 100-220°C.
The hair curler product design based on the PID algorithm, compared with most hair curler products on the market, has greatly improved both in temperature accuracy and applicability, and at the same time it follows the CE/FCC certification standard design, which is extremely The earth has expanded its market capacity.
3.The use of curling iron tips
The heating parts of the curling iron are exposed. If you curl your hair at home, other people should help you curl your hair. Try to avoid curling your hair yourself. If you are not careful, it will easily cause burns. If you operate it by yourself, you must choose a curling iron with a clip, and a curling iron without a clip is not easy to operate by yourself. Clamp the tail of the hair with a clip, slowly roll it to the root of the hair, let it stay for 20 seconds and then release it, and the curl will be formed. Too long time will damage the hair quality. Using an automatic hair curler can avoid burns. The temperature of the outer casing of the automatic hair curler generally does not exceed 60 degrees, and the heat is dissipated in a timely manner, and the handle temperature is lower.
1. Pay attention to adjust the temperature well, and do not touch the heating element with your hands to avoid burns.
2. Use it after the hair is completely dry. It is not easy to curl the hair when it is wet
3. It is not advisable to grab too much hair each time. If too much hair is curled at one time, it will affect the hair retention effect.
4. When curling the hair, start from the bottom hair, and the top hair can be tied up first, and curled layer by layer. If you don't have a lot of hair, you can also start with a small amount of curls from the sides of the hair.
5. Wait for the hair stick to heat up before starting to curl the hair. The curling time should not be too long, otherwise it will damage the hair.
6. To curl your hair well, your hair must have layers. Hair without layers will not look good no matter how it is curled.
7. Choose a curling iron suitable for the model (the diameter of the curling iron). 28MM, 32MM, 33MM, and 38MM can all produce large waves. The larger the number, the larger the curl, but the larger the number, the larger the wave The easier it is to be straight. This needs to be chosen according to your own hair.
The above are the details of the face curling iron solution introduced by Shenzhen Zuchuang Microelectronics Co., Ltd. for you. If you have electronic function development needs for hair irons, hair curlers, and hair straighteners, you can trust us. We have rich experience in custom development of electronic products, and can evaluate the development cycle and material prices as soon as possible. We are a number of chip agents at home and abroad, including MCU, voice IC, Bluetooth IC and modules, wifi modules. Our development capabilities cover PCB design, single-chip microcomputer development, software custom development, APP custom development, WeChat official account development and other hardware and software design. It can also undertake the research and development of smart electronic products, household appliances scheme design, beauty equipment development, Internet of Things application development, smart home scheme design, TWS scheme development, Bluetooth audio development, children's toy scheme development, and electronic education product development.
- TOP